Ajax Curtain Outdoor

The Ajax Curtain Outdoor Jeweller is a motion detector for covering the perimeter of a site with exceptional accuracy and a near-zero chance of false alarms. Featuring a unique optical system, the device looks over narrow sectors of up to 12 m long. Dual motion detection technology engaging two PIR sensors and one Ka-band microwave sensor allows filtering out false alarms caused by thermal noise, animals, or plants. The detection range and pet immunity mode are configured via a slider on the detector’s enclosure, and sensitivity is configured in Ajax apps to meet the specific needs of the site. Pre-installed batteries ensure stable performance for up to three years.

Curtain Outdoor Jeweller operates in two modes: regular and with pet immunity on. In the regular mode, any motion within the covered area triggers an alarm. The pet immunity mode is designed to ignore the movement of animals up to 100 cm tall and minimize false alarms.

Facility-specific motion detection

The device offers up to 12 m of detection range, which, however, can be adjusted to fit the peculiarities of a site. For example, the range can be set for the detector to cover doors and windows yet to ignore high-traffic zones like a walkway. Detection sensitivity levels are also essential to limit false patrol dispatches. Set the sensitivity to low in areas prone to false alarms, medium for most sites, and high in obstacle-free zones where immediate threat detection is crucial.

Effortless installation and setup

Curtain Outdoor Jeweller is ready to operate straight out of the box. There are three options for installing the detector: using the SmartBracket mounting panel, an angle mount, or a third-party mount. There is also an option to protect masking sensors from rain and snow with the hood. Ajax apps help quickly make the device a part of the system: simply pair the device with the hub by scanning a QR code. The detector can always be reconfigured remotely without the need for on-site visits.

Features:

• 2 PIR and 1 microwave sensors
• Motion detection range adjusted with a slider at the device enclosure
• Vertical viewing angle: 85° without blind spots under the detector
• Horizontal viewing angle: 8°
• Installation perpendicular or parallel to the surface with SmartBracket or angle mount
• Pet immunity: the device ignores pets below 100cm (3.3ft) in height
• Anti-masking system that meets grade 2 requirements
• Tamper alarm and a built-in accelerometer to notify of an attempt to dismantle the device
• Protection against spoofing with device authentication
• Holding screw to secure the detector on the SmartBracket or Hood
• Wireless communication range of up to 1,700m (5,550 ft)
• Block cipher encryption for advanced data protection
• Regular polling to check the current state of the device
• Frequency hopping to prevent interception and jamming
• Pairs with Hub via QR code
• Remote control and configuration in Ajax app
• Battery life up to 3 years
• No need to disassemble the enclosure during the installation
• Bundle hood to protect from rain and snow